• 2-Minute automatic quick mold change allows you to reduce labor and idle time for a mold change and to make another product quickly, which will give you more profit. You can also change height in another one minute ease.
  • You can move the compression head out of the machine by simply punching a button. And you can maintain and/or clean up the top of the mold, base & face concrete feed drawers and compression shoes in an open area, which allows for safer and easier maintenance.
  • Powerful Variable Vibrator vibrates mold vertically, which saves mold wear.
  • Powerful Variable Vibrator allows for independent variable amplitude (0 – max.) and revolution (0 – 3,600 r.p.m.) control for the fill cycle and compression cycle to optimize mold vibration for each mix design and mold configuration. This control achieves producing a higher quality product with less cement usage in a shorter time and gives you more profit.
  • You can preset up to 99 operating conditions (patterns) such as vibration, timers, etc., which enables you to get the best operation for the product with ease in a shorter time.
  • All bearings of Variable Vibrator are lubricated automatically, which makes the life of bearings longer with minimum maintenance.
  • There is no clutch/brake to stop the vibrator shaft, which reduces your maintenance cost.
  • The heavy-duty vibration table transfers vibration forces into the mold efficiently.
  • The simple and heavy-duty design ensures easy operation at lower maintenance costs and continuous, long life operation.
  • Built-in horizontal core puller is very convenient and meets with the versatility of products.
  • Control Panel with electric trouble shooter helps you with easier and effective production.
  • Competitors’ molds can be used with small modification.
  • Compression head vibrator operated pneumatically is available as an option.
  • The front feed drawer to supply the face concrete on pavers, etc. is available as an option.
Related Literature: TG Series
Related Video:

Specifications

Available with TG-5 TG-6
Offbearing hoist systems N/A N/A
Rack loader & unloader systems N/A N/A
Rack transfer systems (CR or RTS) OK OK
Pallet transporter systems (PTS) OK OK
Single pallet handling systems (SPH) OK OK
Cubing systems OK OK

Features

Vibrator motor – kW 30 kW (40 hp) 30 kW (40 hp)
Pump motor – kW 55 kW (73.3 hp) 55 kW (73.3 hp)
Hydraulic pump – Liters per minute 315 liters

(82 U.S. Gallons)

315 liters

(82 U.S. Gallons)

Oil Cooling Fan/Heat exchanger motor – kW 0.8 kW (1hp) 0.8 kW (1hp)
Hydraulic oil reservoir/Tank – Liters 750 liters

(197.3 U.S. Gallons)

750 liters

(197.3 U.S. Gallons)

Recirculating pump motor – kW 2.2 kW (2.9 hp) 2.2 kW (2.9 hp)
Recirculating pump – Liters per minute 138 liters

(36.3 U.S. Gallons)

138 liters

(36.3 U.S. Gallons)

Hydraulic system pressure – MPa 14.5/17 MPa (2100/2465 psi) 14.5/17 MPa (2100/2465 psi)
Rotary agitator motor Hydraulic Hydraulic

Capacity

Steel pallet size – mm 1100 x 470 x 13 1320 x 470 x 14
Steel pallet size – inches “45-5/16″” x 18-1/2″”

x 1/2″””

“52”” x 18-1/2″” x 9/16″””
Useable mold cavity – mm 650 x 450 x 40-215 953 x 470 x 40-215
Useable mold cavity – inches “42-1/2″” x 17-3/4″”

x 1-37/64″”- 8-1/2″””

“51-3/16″” x 17-3/4″”

x 1-37/64″”- 8-1/2″””

Productivity

Average dry cycle speed in seconds 4.5 4.5
Average wet cycle speed in seconds 10 10
Average cycles per minute 6.00 6.00

Concrete masonry units per cycle/pallet

“10 cm/4″” block per cycle/pallet” 10 12
“12 cm/5″” block per cycle/pallet” 8 10
“15 cm/6″” block per cycle/pallet” 7 8
“20 cm/8″” block per cycle/pallet” 5 6
“25 cm/10″” block per cycle/pallet” 4 5
“30 cm/12″” block per cycle/pallet” 3 4
Holland-Stone pavers – 10 x 20 cm 20 24

Dimensions & Weight

Weight 27000 kg (59400 lbs) 28000 kg (61600 lbs)
Machine size (Width x Height x Length) – mm 3280 x 4400 x 7040 3490 x 4400 x 7040
Machine size (Width x Height x Length) – inches “129-1/8″”

x 173-15/64″”

x 277-5/32″””

“137-13/32″”

x 173-15/64″”

x 277-5/32″””