• 2-minute automatic quick mold change allows you to reduce labor and idle time for a mold change and to make another product quickly, which will give you more profit. You also can change height in less than 1 minutewith ease.
  • You can move the compression head out of the machine by simply pushing a button. And you can maintain and/or clean up the top of the mold, feed drawer and compression shoes in an open area, which allows for safer and easier maintenance.
  • Synchronized vigorous vibration vibrates mold vertically, which produces quality products in a shorter time and saves mold wear.
  • Powerful vibrator driven by servomotor allows for independent variable speed (revolution) controls for the fill cycle and compression cycle up to 3,600 r.p.m. to optimize mold vibration for each mix design and mold configuration. This control achieves producing a higher quality product in a shorter time and gives you more profit.
  • There is no clutch/ brake to stop the vibrator shaft, which reduces your maintenance cost.
  • The heavy-duty vibration table transfers vibration forces into the mold efficiently.
  • The simple and heavy-duty design ensures easy operation at lower maintenance costs and continuous, long life operation.
  • Built-in horizontal core puller is very convenient and meets with the versatility of products.
  • Control panel with electrical troubleshooter helps you with easier and effective production.
  • Competitors’ molds can be used with small modification.
  • Compression vibrator operated pneumatically is available as an option.
  • The front feed drawer to supply the face mix on pavers, etc. is available as an option.
  • The variable vibrator which can change both amplitude and revolution is available as an option
Related Literature: TG Series

Specifications

Available with TG-3 TG-4
Offbearing hoist systems N/A N/A
Rack loader & unloader systems OK OK
Rack transfer systems (CR or RTS) OK OK
Pallet transporter systems (PTS) OK OK
Single pallet handling systems (SPH) OK OK
Cubing systems OK OK

Features

Vibrator motor – kW 30 kW (40 hp) 30 kW (40 hp)
Pump motor – kW 45 kW (60 hp) 55 kW (73.3 hp)
Hydraulic pump – Liters per minute 315 liters

(82 U.S. Gallons)

315 liters

(82 U.S. Gallons)

Oil Cooling Fan/Heat exchanger motor – kW 0.4 kW (0.53 hp) 0.4 kW (0.53 hp)
Hydraulic oil reservoir/Tank – Liters 650 liters

(171 U.S. Gallons)

650 liters

(171 U.S. Gallons)

Recirculating pump motor – kW 2.2 kW (2.9 hp) 2.2 kW (2.9 hp)
Recirculating pump – Liters per minute 138 liters

(36.3 U.S. Gallons)

138 liters

(36.3 U.S. Gallons)

Hydraulic system pressure – MPa 9.5/14.5 MPa (1370/2100 psi) 9.5/14.5 MPa (1370/2100 psi)
Rotary agitator motor Hydraulic Hydraulic

Capacity

Steel pallet size – mm 660 x 470 x 8 978 x 470 x 12
Steel pallet size – inches “26”” x 18-1/2″” x 5/16″”” “38-1/2″” x 18-1/2″”

x 15/32″””

Useable mold cavity – mm 650 x 450 x 40-215 953 x 470 x 40-215
Useable mold cavity – inches “25-1/2″” x 17-3/4″”

x 1-37/64″”- 8-1/2″””

“37-33/64″” x 18-1/2″”

x 1-37/64″”- 8-1/2″””

Productivity

Average dry cycle speed in seconds 4.2 4.2
Average wet cycle speed in seconds 8.5 8.5
Average cycles per minute 7.06 7.06

Concrete masonry units per cycle/pallet

“10 cm/4″” block per cycle/pallet” 6 9
“12 cm/5″” block per cycle/pallet” 5 7
“15 cm/6″” block per cycle/pallet” 4 6
“20 cm/8″” block per cycle/pallet” 3 4
“25 cm/10″” block per cycle/pallet” 2 3
“30 cm/12″” block per cycle/pallet” 2 3
Holland-Stone pavers – 10 x 20 cm 12 16

Dimensions & Weight

Weight “20000 kg (44,000 lbs)” 25000 kg (55000 lbs)
Machine size (Width x Height x Length) – mm 2800 x 4300 x 5500 3010 x 4300 x 5500
Machine size (Width x Height x Length) – inches “110-15/64″”

x 169-19/64″”

x 216-17/32″””

“118-1/2″”

x 169-19/64″”

x 216-17/32″””